Individual Assignment – SOX Paper

Individual Assignment – SOX Paper

Write a paper on the Sarbanes Oxley Act of 2002.)

A formal introduction paragraph, including thesis

2) The circumstances leading up to the Act

3) A summary of the major provisions of the Act

4) How the Act changed the accounting regulatory environment

5) The perceived positive and negative effects caused by the Act since it’s implementation.

6) A formal conclusion paragraph

 

Your paper should be in APA format.  See attached APA sample paper (link at right).  Your paper should be formatted the same as the sample paper, as should any and all other papers you write in this class.

 forgot to add this part:

Your paper should include at least 5 credible references.  1 of the references must be your textbook.  Wikipedia and/or Investopedia are NOT credible references.  These are just example

Running head: WRITING STYLE AND MECHANICS 1

 

 

 

 

 

 

Writing Style and Mechanics

 

Student Name

Course/Number

Date

Instructor Name*

 

 

 

 

 

 

 

REQUIRED TITLE PAGE INFORMATION

As shown above, center the following elements on the page in this order:

 Title of Paper (mixed upper and lower case letters)

 Your Name (first and last name without including academic or license information such as BSN or RN)

 Course Abbreviation and Number

 Due Date (month, day, and year)

 Instructor’s Name *Doctoral students must format the title page according to APA guidelines as follows: title, author’s name, and institution name.

All lines are double-spaced throughout the entire document. Use black, 12-point Times New Roman font throughout the document. Arial and Courier font types are acceptable.

 

The Writing Style and Mechanics paper provided by the Center for Writing Excellence represents the consensus of several deans and other key academic officials within Apollo Group. The sample paper corresponds to APA style, which is the University’s preferred style. This document may contain more than 20% of its information from a single source. The sample paper is written to help you format your paper. Typically, an academic paper will include information from a variety of sources and should not contain more than 20% of its information from a single source. Although this sample paper is offered as a tool to help students with style, it is not a definitive or binding representation of format accepted by individual instructors. As a result, for all unresolved style and format issues, it is essential that you consult with your instructor before submitting your paper for a grade. Your instructor is the final authority regarding acceptable format and style for papers associated with a course, and the instructor’s recommendations will prevail over this sample paper in the event that differences occur between the two. Revised: June 2011(new document heading section)

Pagination and Page Header: Use the header feature in Microsoft

® Word

to set the page number and to add the running head if one is included. See Appendix A for directions.

The title is in upper and lower case letters, centered between the left and right margins, and positioned on the upper half of the page. Use black, 12- point Times New Roman font throughout. Arial and Courier font types are acceptable. Doctoral students: See the note below about formatting the title page for your program requirements.

Typically, the running head is required only for publication. Check with your instructor regarding the preference for using a running head. Doctoral students must include the running head. The words Running head only appear on the title page. Use no more than the first 50 characters of the title.

 

Center for Writing Excellence

© 2009-2010 Apollo Group, Inc. All rights reserved.

 

 

WRITING STYLE AND MECHANICS 2

Abstract

According to the Publication Manual of the American Psychological Association (APA), An

abstract is “a brief, comprehensive summary of the contents of the article; it allows readers

to survey the contents of an article quickly and, like a title, it enables persons interested in

the document to retrieve it from abstracting and indexing databases” (2010, p. 25). The first

line of the abstract is not indented. An abstract may range from 150 to 250 words (APA,

2010). Because an abstract is not always required for student papers, adhere to your

instructor’s requirements.

 

 

 

WRITING STYLE AND MECHANICS 3

Quotations: All quotations require a page number or paragraph number.

Indent the first line of each paragraph using the tab key. The tab key is usually set at five to seven spaces or one- half inch.

Writing Style and Mechanics

The Publication Manual of the American Psychological Association (APA) began as

a journal article in 1929. That article reported results from a meeting of scholars “to

establish a simple set of procedures, or style rules, that would codify the many components

of scientific writing to increase the ease of reading comprehension” (APA, 2010, p. xiii).

Today the Publication Manual is in its sixth edition, and the APA style described in it is a

widely recognized standard for scholarly or professional writing in the social sciences.

Although the style guide is designed to prepare manuscripts for publication, many

universities and health care journals have adopted its use as a guide to achieve uniformity

and consistency (Cuddy, 2002). Writing in the style prescribed by the Publication Manual

can be a daunting experience for students. As with any new skill, “practice makes perfect”

(S. Proofreader, personal communication, June 28, 2004). Points of APA style most often

used by undergraduate and graduate students are listed below. However, keep in mind that

this sample paper is a guide and should not be considered as a replacement for the

Publication Manual.

Format Considerations

Some commonly used rules and formats from the sixth edition of the Publication

Manual are listed below. Please note, however, that some assignments may require unique

formatting, and you should consult with your instructor for clarification.

Correct Margins

Margins are one inch on all sides. This rule is broken only to avoid placing a lone

heading on the last line of the page or a single line of text on the top of the next page.

Level One Heading: Level one headings are centered and bolded in upper and lower case letters. .

Level Two Heading: Level two headings are placed at the

left margin and bolded in upper and lower case letters.

Personal communication: A personal communication is not included on the reference page.

 

Do not include Introduction as a level heading. Instead, begin the text of the paper by repeating the title from your title page. The title of the paper is centered but not bolded.

Margins: Use one-inch margins on all sides of the document.

 

Use one space or two spaces after a period at the end of a sentence. Be consistent with usage throughout the document. Doctoral students should use two spaces after sentence- ending punctuation in the body of the paper.

 

 

WRITING STYLE AND MECHANICS 4

Page Header

The page header contains the running head and the page number. Check with your

instructor to see if a running head is required. The header is set using the header feature in

Microsoft ® Word. Consult Appendix A for format directions for the header feature. The

words Running head only appear on the title page. Use no more than the first 50 characters

of the title in running head. The page number is set at the right margin, and the running head

is set at the left margin. The automatic header function of a word-processing program should

be used to place the page numbers consecutively in the paper. Arabic numerals (1, 2, 3, and

so on) are used to number each page, beginning with 1 on the title page.

Document Headings

Paragraph headings should be used in long documents to organize the essay, to break

it up into readable portions, and to make it easy for readers to locate information. Using

headings in a short document before every paragraph can make the writing appear choppy,

and the paper may not flow smoothly from point to point. Use paragraph headings if your

document is longer than three or four pages and if your instructor requires paragraph

headings.

Reference Page

Hanging indentation is used for the reference page. (See Appendix B for format

directions to create hanging indents.) In a hanging indent, the first line of the reference rests

against the left margin, and the lines that follow are indented five to seven spaces or one-half

inch to the first tab stop. The reference page is alphabetized by author or by title of the work

when no author is listed, and each entry contains the date of publication in parentheses

directly after the author’s name. The title, the place of publication, and the name of the

 

 

WRITING STYLE AND MECHANICS 5

publisher follow the date of publication for a book entry. The proliferation of electronic

materials has prompted APA to create formats designed specifically for Internet and web-

based written material. Visit the APA website at www.apastyle.org for additional

information about formatting electronic references. You will also find frequently asked

questions and helpful free tutorials about using APA style.

Only references that have been cited in the paper are listed on the reference page.

Personal communications are cited in the text but do not appear on the reference page

because the reader cannot retrieve them. Additional reference examples are available in the

Reference and Citation Examples tutorial in the Center for Writing Excellence at Tutorials

& Guides.

In-Text Citations

Direct quotations. Direct quotations must mirror the original source word for word,

even if errors are contained in the original text. To alert the reader that errors are part of the

original material, the word [sic], enclosed in brackets and italicized, must follow the

erroneous material. The source of the quotation must be cited. The format of direct

quotations may vary with the placement of the quoted material in the sentence. The

following is an example of how you may use a direct quotation from a website with an

author: “Diversity is emerging as one of the most serious issues in the workplace today, yet

most employers are not prepared to deal with it” (Copeland, 2003, Erroneous Assumptions,

para. 1). The author’s last name, the year of publication, the website title or section title, and

the paragraph number, when no page number is available, are included in the citation.

The following is an example of how one may use a direct quotation from a book with

one author: Venes (2001) stated, “The types of influenza doctors must prepare for fall into

“Erroneous Assumptions” is the heading of a section within the web- based article, “Managing a Multicultural Workforce.” Using the heading of a section for an online article will help your reader quickly locate the content in the original source.

 

Level Three Heading: Level three headings are indented and bolded. Capitalize only the first word, include a period at the end, and continue the text without using a hard return.

 

 

 

WRITING STYLE AND MECHANICS 6

three categories” (p. 106). If the author’s name is stated prior to the quotation, include the

date of publication (in parentheses) after the author’s name, and follow the quotation with

the page or paragraph number. For a work with two authors, use both authors’ last names for

every citation. If the source has three or more authors but fewer than six authors, list all

authors in the first citation, and use the first author’s last name and the words et al. (without

italics) for the rest of the citations. If the source has more than six authors, you may use the

first author’s last name and the words et al. (without italics) for every citation (APA, 2010,

p. 175). Refer to the Reference and Citation Examples tutorial in the Center for Writing

Excellence at Tutorials & Guides for examples of in-text citations.

Quotations that contain fewer than 40 words are enclosed in double quotation marks

within the text. Use single quotation marks for quotations contained within a direct

quotation. Quotations of 40 words or more are indented in a block format without quotation

marks. Use double quotation marks to indicate a quotation within the block quotation. The

block quotation is started on a new line, and it is indented five to seven spaces or one-half

inch. A sample block quotation appears on page 8 of this document.

Paraphrased material. Paraphrasing allows the writer to present someone else’s

ideas or intellectual property and to supply proper credit to the original author or authors

(Lawton, Cousineau, & Hillard, 2001). When an author is paraphrased, the source must be

cited in the text. If a source is mentioned more than once in a paragraph, a citation must be

included each time. Page or paragraph numbers are not required for paraphrased material,

but the Publication Manual recommends that writers include a page or paragraph number to

help the reader easily locate the information (APA, 2010, p. 171). If a writer were to

paraphrase information from an article located in an online database, the writer would

Write out and with authors’ names mentioned within the text. Use an ampersand (&) when they are written within a citation.

 

 

 

WRITING STYLE AND MECHANICS 7

format the citation as follows: Daniels (2004) included Darden Restaurants on her list of the

50 best companies for minorities. Here is an example where the author is not mentioned

within the text: A list of companies has been singled out as best for minority employees

(Daniels, 2004). Both examples include the author’s last name and the date of publication. If

the author’s name is not provided with the paraphrased text, it must be included in the

citation. Refer to the Reference and Citation Examples tutorial in the Center for Writing

Excellence at Tutorials & Guides for examples of paraphrasing.

Plagiarism. Plagiarism constitutes a serious academic concern. According to

Lawton, Cousineau, and Hillard (2001), “Academic communities demand that writers credit

others for their work and that the source of their material clearly be acknowledged” (para.

6). Internet access has resulted in an increase in plagiarism. McCabe noted (as cited in

Sterngold, 2004), 41% of students said they engaged in cut-and-paste plagiarism from

online sources. The sentences and phrases used in one’s paper must be original or cited and

referenced accordingly. Although it may be easier for a writer to use someone else’s words,

doing so discredits the writer. When in doubt, cite. See the Plagiarism Guide in the Center

for Writing Excellence at Tutorials & Guides for more information about avoiding

plagiarism and about properly citing intellectual property.

Other Format Issues

The preferred typeface for APA style is black, 12-point Times New Roman (APA,

2010). However, Arial and Courier font types are acceptable. Avoid using any software

settings that reduce spacing between words or letters or that add spacing between

paragraphs. Use double-spacing throughout the document. You may use one space or two

spaces after sentence-ending punctuation in the body of your essay, but use consistent

Secondary Sources: A

secondary source is also called an indirect source. List only the primary source in the reference list, and cite the author of the secondary source only within the text. Secondary sources are not ideal in academic writing and should be avoided.

Electronic source and quotation: If the electronic source does not have page numbers, use the abbreviation para. for the

paragraph number.

 

 

 

WRITING STYLE AND MECHANICS 8

spacing at the end of a sentence throughout your essay. For consistency with APA style,

Doctoral students must space twice after sentence-ending punctuation in the body of an

essay and space once after a period separating each main element in the reference list.

Although the Publication Manual (2010) requires an abstract to precede the text, an

abstract is not used in most student papers. Instructors may require an abstract if students are

submitting lengthy papers or project proposals. In those cases, the direction to submit an

abstract will be in the assignment guidelines.

Writing Mechanics

Correct grammar, punctuation, spelling, and sentence structure—in addition to

formatting—are essential components of scholarly writing. Strunk (1918/1999) emphasized

the importance of being succinct:

Vigorous writing is concise. A sentence should contain no unnecessary words, a

paragraph no unnecessary sentences, for the same reason that a drawing should have

no unnecessary lines and a machine no unnecessary parts. This requires not that the

writer make all his sentences short, or that he avoid all detail and treat his subjects

only in outline, but that every word tell. (para. 1)

Grammar

In addition to the provision of a standardized format for scientific writing, the

Publication Manual (2010) emphasizes the importance of proper grammar. For a thorough

grammar review, refer to the Grammar and Writing Guides in Tutorials & Guides from the

Center for Writing Excellence homepage. The Grammar and Writing Guides are resources

that review grammar, mechanics, and style, and each section contains practice quizzes.

Important basic grammar principles are listed below.

Block quotation: Block quotations are indented to the tab margin and do not contain quotation marks. The in-text citation occurs outside of the punctuation that ends the sentence.

 

 

 

WRITING STYLE AND MECHANICS 9

Subject and verb agreement. A singular noun requires a singular verb, and a plural

noun requires a plural verb (APA, 2010). Words that intervene between the noun and the

verb do not change this basic rule.

Noun and pronoun agreement. When writers use a singular noun, they must also

use a singular pronoun. To avoid using he/she (he or she) or him/her (him or her), writers

may reword the sentence and use a plural noun and a plural pronoun to eliminate the

problem of nouns and pronouns that do not agree. For example, the sentence “A student

applying for a job must carefully proofread his or her application” may be reworded to read,

“Students applying for jobs must carefully proofread their applications.” Use of plural forms

also helps writers reduce bias, avoid stereotypes, and refrain from using both singular and

plural in the same sentence or paragraph.

Passive voice. Passive voice obscures the actor in this sentence: “The house was

painted,” because it omits who applied the paint. In contrast, the same sentence written in

active voice would be something such as this: “Our company painted the house.” The

passive voice, which is a form of “be” (is, was, were, will be, have been, etc.) and a

participle (painted, etc.), is useful when the actor’s identity is not important to the sentence

or context. Overuse of the passive voice causes the document to read similarly to an

instructional manual, dry and monotonous. According to Sigel (2009), it weakens the

essay’s argument and prevents clear and concise writing. Occasional use of the passive

voice is acceptable, but documents written primarily in the active voice are more enjoyable

and more persuasive to read (Sigel, 2009).

Punctuation. Correct punctuation establishes the rhythm and readability of

sentences. Use only one space after commas, colons, and semicolons. Use one or two spaces

 

 

WRITING STYLE AND MECHANICS 10

after a period at the end of a sentence (be consistent with use). When a hyphen or a dash is

used, no space appears before or after the hyphen or dash (APA, 2010). Correct use of

commas and semicolons can be challenging for students. Writers are encouraged to

proofread their papers to ensure proper use of commas (Purdue OWL, 2009).

Capitalization. Capitalization is used to designate a proper noun or trade name as

well as major words in titles and in headings. Instances where capitalization is not used

include laws, theories, models, or hypotheses, such as ethical decision-making models and

names of conditions or groups in an experiment, such as experimental or control groups

(APA, 2010). A common error in capitalization is its use with the name of a job title or

department. An example is human resources, which is not capitalized, versus the specific

title of ACME Human Resources Department, which is capitalized.

Seriation (elements written in a series). Items contained in a list help to clarify the

point being made or help to clarify components of a subject. Bullets may be used for a list in

academic writing according to APA standards (2010). To show seriation of separate

paragraphs, however, number each paragraph with an Arabic numeral followed by a period

that is not enclosed in or followed by parentheses. To show seriation within a paragraph or a

sentence, use lowercase letters in parentheses. An example of seriation is shown in

Appendix C.

Numbers. Spell out numbers one through nine that appear in the body text. Use

Arabic numerals to express numbers 10 and above. Exceptions to this rule are discussed in

the Grammar and Writing Guides in the Center for Writing at Tutorials & Guides. Once in

the Grammar and Writing Guides, go to Grammar Mechanics and select Number Usage for

 

 

WRITING STYLE AND MECHANICS 11

a list of the exceptions. If you have the Publication Manual, sixth edition (2010), refer to

pages 111-114 for detailed information about number usage.

Third person versus first person. Person refers to the point of view or the source

of the writer’s opinions. Use third person (he, she, they) in academic writing. When

referring to yourself, however, stating “The writer instructed the patients” is ambiguous and

may give the impression that you did not participate. Instead, use a first person personal

pronoun: “I instructed the patients.” For the most part, reference to self in first person should

be limited to personal reflection or opinion papers.

Conclusion

By understanding mechanics and usage requirements and by referencing materials

appropriately with in-text citations and reference entries, you will clearly communicate the

content of your work. Use the information included in this paper to develop effective

academic papers. You are also encouraged to refer to the resources in the Center for Writing

Excellence and the style information from www.apastyle.org for additional information

about academic writing.

TIP: Always include a conclusion that summarizes the main points of the paper. Check with your instructor regarding the preference for the inclusion of a Conclusion heading.

 

 

WRITING STYLE AND MECHANICS 12

Book with a corporate author

Online Journal Article

A source available on a university program or department website

Reference Page: Use a separate page to list the references and double- space the entire page. Note that throughout the paper and the reference list, titles of non-periodicals and the names of journals, book titles, and

volume numbers are set in italics rather than being underlined.

A source with a digital object identifier (DOI)

References

American Psychological Association. (2010). Publication manual of the American

Psychological Association (6th ed.). Washington, DC: Author.

Copeland, L. (2006). Managing a multicultural workforce. California Job Journal.

Retrieved from http://www.jobjournal.com

Cuddy, C. M. (2002). Demystifying APA style. Orthopaedic Nursing, 21(5), 35-42.

Retrieved from http://www.orthopaedicnursing.com

Daniels, C. (2004, June 28). 50 Best companies for minorities. Fortune, 149(13), 136-

146. Retrieved from http://money.cnn.com/magazines/fortune

Lawton, K. A., Cousineau, L., & Hillard, V. E. (2001). Plagiarism: Its nature and

consequences. Retrieved from Duke University Guide to Library Research website:

http://www.lib.duke.edu/libguide/plagarism.htm

Purdue OWL. (2009). Commas: Quick rules. Retrieved from Purdue University Online

Writing Lab website:

http://owl.english.purdue.edu/handouts/grammar/g_commaproof.html

Sigel, T. (2009). How passive voice weakens your scholarly argument. Journal of

Management Development, 28(5), 478-480. doi:10.1108/02621710910955994

Sterngold, A. (2004). Confronting plagiarism: How conventional teaching invites cyber-

cheating. Change, 36(3), 16. Retrieved from http://www.changemag.org

Strunk, W., Jr. (1999). Elementary principles of composition: Omit needless words. In The

elements of style. Retrieved from http://www.bartelby.com/141/strunk5.html#13

(Original work published 1918)

Book with an edition

 

 

WRITING STYLE AND MECHANICS 13

Venes, D. (2001). Taber’s cyclopedic medical dictionary (19th ed.). Philadelphia, PA: F.A.

Davis.

 

 

WRITING STYLE AND MECHANICS 14

Appendix A: Header Feature in Microsoft ® Word

Page Headers

Identify each page with the running head at the left margin and the page number

placed at the right margin. (Use a running head only if your instructor requires it or if you

are a doctoral student.) Do not use your name to identify each page. Be sure the font type

and size are the same in the header as that used throughout the document.

Word 2003

To create a correct header with an automatic page number in Word 2003, use the

following guidelines:

1. Select the View menu on the toolbar. 2. Select Header and Footer. (If you are not creating a running head, skip to number 8

below.)

3. Place the cursor in the Header box and select the left justification button on the toolbar so that the cursor in the Header box moves to the left.

4. Type the running head, if required. Otherwise, continue with number 8 below. 5. Select the Page Setup icon (the sixth icon in the Header and Footer toolbar). 6. Select the different first page option in the Layout tab to make the first page header

different from the rest of the document.

7. Adjust the first page header to include the words Running head (without italics) with the first 50 characters of the title, and adjust the header on the second page to include

the first 50 characters of the title.

8. Tab to the right so that the cursor in the Header box moves to the right margin. 9. Use the automatic function for inserting the page number as illustrated in this picture

by selecting the first button with the # symbol.

10. Select Close. Your header is complete.

 

Word 2007

To create a correct header with an automatic page number feature in Word 2007, use

the following guidelines:

 

1. Click on the Insert tab. 2. Select the Header icon.

 

 

WRITING STYLE AND MECHANICS 15

3. Choose the Blank header tab from the drop-down menu. This places the cursor inside

the header at the left margin.

4. Type the running head (the first 50 characters of the title in all capital letters. Do not yet include the words, Running head:), if required. Otherwise, continue with number

7 below.

5. Tab to the right margin, and click the Page Number icon. 6. Place the cursor over Current Position. A drop-down menu should appear. 7. Select the Plain Number option. A number 1 will appear at the right margin of your

document. (Once the different first page has been created, this number will change to

2, 3 . . . when the document is typed.)

8. From the Design menu for Header & Footer, select the option labeled Different first page.

9. Create the new first page header to include the words Running head: (do not, however, use italics) and, as before, the first 50 characters of the title in all capital

letters.

10. Once again, tab to the right margin, and click the Page Number icon. 11. Place the cursor over Current Position. A drop-down menu should appear. 12. Select the Plain Number option. A number 1 will appear at the right margin of your

document.

13. Choose Close Header and Footer (the red X at the far right on the menu). Your cursor then appears at the beginning of the document, and automatic page numbers

should be visible as you type each new page.

14. Verify that the page numbers at the right of the header for page 1 and for page 2 are at the same location for the right margin. (If not, use the ruler bar to make

adjustments.)

 

Word 2010

To create a correct header with an automatic page number feature in Word 2010, use

the following guidelines:

 

1. Click on the Insert tab. 2. Select the Header icon.

3. Choose the Blank header tab from the drop-down menu. This places the cursor inside

the header at the left margin.

4. Type the running head (the first 50 characters of the title in all capital letters. Do not yet include the words, Running head:), if required. Otherwise, continue with number

7 below.

 

 

WRITING STYLE AND MECHANICS 16

5. Tab to the right margin, and click the Page Number icon. 6. Place the cursor over Current Position. A drop-down menu should appear. 7. Select the Plain Number option. A number 1 will appear at the right margin of your

document. (Once the different first page has been created, this number will change to

2, 3 . . . when the document is typed.)

8. From the Design menu for Header & Footer, select the option labeled Different first page.

9. Create the new first page header to include the words Running head: (do not, however, use italics) and, as before, the first 50 characters of the title in all capital

letters.

10. Once again, tab to the right margin, and click the Page Number icon. 11. Place the cursor over Current Position. A drop-down menu should appear. 12. Select the Plain Number option. A number 1 will appear at the right margin of your

document.

13. Choose Close Header and Footer (the red X at the far right on the menu). Your cursor then appears at the beginning of the document, and automatic page numbers

should be visible as you type each new page.

14. Verify that the page numbers at the right of the header for page 1 and for page 2 are at the same location for the right margin. (If not, use the ruler bar to make

adjustments.)

 

 

 

 

 

 

 

 

WRITING STYLE AND MECHANICS 17

Appendix B: Directions for a Hanging Indent

Microsoft ®

Word 2003

Select the text that requires a hanging indent or create a hanging indent at the top of

the references page before typing the text. From the Format menu, select the Paragraph

command (as shown in Picture One). In the Special list under Indentation, select Hanging

(Picture Two).

Picture One

 

 

Picture Two

 

 

 

 

WRITING STYLE AND MECHANICS 18

Microsoft ®

Word 2007

Select the text that requires a hanging indent or create a hanging indent at the top of

the references page before typing the text. From the Home menu, click on the Paragraph

command (see Picture One). This will bring up the Indents and Spacing tab (see Picture

Two). Under Indentation in the Special box, click on Hanging and choose OK.

Picture One

 

 

Picture Two

 

 

 

 

 

WRITING STYLE AND MECHANICS 19

Microsoft ®

Word 2010

Select the text that requires a hanging indent or create a hanging indent at the top of

the references page before typing the text. From the Page layout menu, click on the

Paragraph command seen below. This will bring up the Indents and Spacing tab. Under

Indentation in the Special box, click on Hanging and choose OK.

 

 

 

 

 

 

WRITING STYLE AND MECHANICS 20

Appendix C: Seriation

Seriation

To show seriation (lists) within a paragraph or sentence, use lowercase letters, not

italicized, in parentheses:

Job satisfaction is increased when nurses are provided with (a) therapeutic massage,

(b) relaxation therapy, and (c) music therapy.

To show seriation of separate paragraphs, number each paragraph with an Arabic

numeral, followed by a period but not enclosed in or followed by parentheses. A numbered

list signifies that element 1 is more important than element 2 and so on. See the following

examples to create a numbered or bulleted list.

Berk (2001) suggests that parents determine suitability of books for children by

using the following criteria:

1. Books are made from durable material . . . [paragraph continues]

2. Books are action-oriented . . . [paragraph continues]

If all elements in the list are of equal importance, use bullets instead of numbers as shown

below.

Berk (2001) suggests that parents determine suitability of books for children by

using the following criteria:

 Books are made from durable material . . . [paragraph continues]

 Books are action-oriented . . . [paragraph continues]

 
"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"
Looking for a Similar Assignment? Our Experts can help. Use the coupon code SAVE30 to get your first order at 30% off!

Hi there! Click one of our representatives below and we will get back to you as soon as possible.

Chat with us on WhatsApp